Genetic stratigraphy

@article{myers1936connections,
    author = "Myers, Sumner Byron",
    title = "Connections between differential geometry and topology II. Closed surfaces",
    year = "1936",
    journal = "Duke Mathematical Journal",
    url = "https://doi.org/10.1215/s0012-7094-36-00208-9",
    doi = "10.1215/s0012-7094-36-00208-9",
    number = "1",
    openalex = "W2065087331",
    volume = "2"
}

@misc{samsonov1970about2,
    author = "Samsonov, V. V. and Tyshchenko, L. F",
    title = "About genetic connections between gasses from the closed pores and gasses from the productive seams",
    year = "1970",
    howpublished = "Geology of Oil and Gas, v. 8, p. 33-36",
    note = "talkorigins\_source = {true}; raw\_reference = {Samsonov, V. V., and Tyshchenko, L. F., 1970, About genetic connections between gasses from the closed pores and gasses from the productive seams: Geology of Oil and Gas, v. 8, p. 33-36.}"
}

@incollection{eisen1972connections,
    author = "Eisen, V. and Loveday, C.",
    title = "Connections between Kinin Formation and Complement",
    year = "1972",
    booktitle = "Advances in Experimental Medicine and Biology",
    url = "https://doi.org/10.1007/978-1-4684-7439-8\_15",
    doi = "10.1007/978-1-4684-7439-8\_15",
    openalex = "W188252945",
    pages = "119-127",
    references = "doi101001jama196203050190031006, doi101084jem1292315, doi101111j147653811971tb07123x, doi101136jcp115406, doi101172jci106022, doi1031810037972710125034, doi1031810037972713033780, openalexw193622344, openalexw2409788788, openalexw2418890709"
}

@misc{kalinko1982geologic1,
    author = "Kalinko, M. K",
    title = "Geologic conditions for formation of gas-condensate pools of various genetic types [in Russian]",
    year = "1982",
    howpublished = "Trudy VNIGNI, v. 240, p. 5-17; English Summary in Petroleum Geology, v. 20, no.9, 1984, p.395-397",
    note = "talkorigins\_source = {true}; raw\_reference = {Kalinko, M. K., 1982, Geologic conditions for formation of gas-condensate pools of various genetic types [in Russian]: Trudy VNIGNI, v. 240, p. 5-17; English Summary in Petroleum Geology, v. 20, no.9, 1984, p.395-397.}"
}

The Dobrudzha Coalfield (Carboniferous, northeast Bulgaria) is formed near the northern margin of the Variscan mobile zone after a post-Tournaisian erosive phase. Shallow marine and subaerial sediments were deposited over a large flat area. The Dobrudzha Coalfield appeared as a fault-delimited depression during the late Late Visean and Namurian A, in which subaerial coal-bearing sediments were deposited. To the north-east, shallow marine (epiplatform) sediments were still being deposited. In the depression, large swamp-lacustrine milieu is filled to some extent by clastic sediments eroded from rising side of the faults, which were consedimentary-active. From these positive areas, coal pebbles as well as plant-fragments were transported and deposited. In the northern part of the depression, near the end of the Namurian A, swamp and maybe lacustrine conditions existed near the shore-line, as indicated by quartz sandstones with some quartz pebbles, interpreted as a bar.

@article{tenchov2004rakovski,
    author = "Tenchov, Yanaki",
    title = "Rakovski Formation (Carboniferous, NE Bulgaria) – stratigraphy, sedimentary conditions and interpretation",
    year = "2004",
    journal = "Geologica Balcanica",
    abstract = "The Dobrudzha Coalfield (Carboniferous, northeast Bulgaria) is formed near the northern margin of the Variscan mobile zone after a post-Tournaisian erosive phase. Shallow marine and subaerial sediments were deposited over a large flat area. The Dobrudzha Coalfield appeared as a fault-delimited depression during the late Late Visean and Namurian A, in which subaerial coal-bearing sediments were deposited. To the north-east, shallow marine (epiplatform) sediments were still being deposited. In the depression, large swamp-lacustrine milieu is filled to some extent by clastic sediments eroded from rising side of the faults, which were consedimentary-active. From these positive areas, coal pebbles as well as plant-fragments were transported and deposited. In the northern part of the depression, near the end of the Namurian A, swamp and maybe lacustrine conditions existed near the shore-line, as indicated by quartz sandstones with some quartz pebbles, interpreted as a bar.",
    url = "https://doi.org/10.52321/geolbalc.34.1-2.85",
    doi = "10.52321/geolbalc.34.1-2.85",
    number = "1-2",
    openalex = "W4315695931",
    pages = "85-96",
    volume = "34"
}

@article{björkhem2010genetic,
    author = "Björkhem, Ingemar and Leoni, Valerio and Meaney, Steve",
    title = "Genetic connections between neurological disorders and cholesterol metabolism",
    year = "2010",
    journal = "Journal of Lipid Research",
    url = "https://doi.org/10.1194/jlr.r006338",
    doi = "10.1194/jlr.r006338",
    number = "9",
    openalex = "W1973747307",
    pages = "2489-2503",
    volume = "51",
    references = "doi101001archderm197201620110090032, doi101038ng439, doi101038ng440, doi1010970000507219851100000003, doi1010970000507219980500000001, doi101126science1072994, doi101126science27753341990, doi101146annurevbiochem72121801161712, doi101159000337230, doi1073260003481910835037"
}

Impressing discoveries in the field of the genetic code have been described by its researchers by means of the terminology borrowed from linguistics and the theory of communications. Leading experts on structural linguistics believe for a long time already that languages of human dialogue were formed not from an empty place, but they are continuation of genetic language or, anyhow, are closely connected with it, confirming the idea of information commonality of organisms. The aticle continues the theme about a connection of linquistic languages with the genetic language. It describes results of comparative study of long Russian literary texts (novels by L.Tolstoy, F.Dostoevsky, A.Pushkin, etc.) and long sequences of hydrogen bonds in double helixes of DNA of different organisms. Formalisms of quantum informatics are used in modeling some of these results taking into account thoughts of many researches about possible using principles of quantum informatics in organisation of living bodies.

@misc{petoukhov2018structural,
    author = "Petoukhov, Sergey",
    title = "Structural Connections between Long Genetic and Literary Texts",
    year = "2018",
    abstract = "Impressing discoveries in the field of the genetic code have been described by its researchers by means of the terminology borrowed from linguistics and the theory of communications. Leading experts on structural linguistics believe for a long time already that languages of human dialogue were formed not from an empty place, but they are continuation of genetic language or, anyhow, are closely connected with it, confirming the idea of information commonality of organisms. The aticle continues the theme about a connection of linquistic languages with the genetic language. It describes results of comparative study of long Russian literary texts (novels by L.Tolstoy, F.Dostoevsky, A.Pushkin, etc.) and long sequences of hydrogen bonds in double helixes of DNA of different organisms. Formalisms of quantum informatics are used in modeling some of these results taking into account thoughts of many researches about possible using principles of quantum informatics in organisation of living bodies.",
    url = "https://doi.org/10.20944/preprints201812.0142.v1",
    doi = "10.20944/preprints201812.0142.v1",
    openalex = "W4238404729",
    references = "doi1010160303264793900188, doi101016jbiosystems201511001, doi101017s0960129507006317, doi101038nature23474, doi101524zpch1996196part1163, doi105860choice194685, doi105860choice360388, openalexw1596092532, openalexw1604177373, openalexw2506358643"
}

Impressing discoveries in the field of the genetic code have been described by its researchers by means of the terminology borrowed from linguistics and the theory of communications. Leading experts on structural linguistics believe for a long time already that languages of human dialogue were formed not from an empty place, but they are continuation of genetic language or, anyhow, are closely connected with it, confirming the idea of information commonality of organisms. The aticle continues the theme about a connection of linquistic languages with the genetic language. It describes results of comparative study of long Russian literary texts (novels by L.Tolstoy, F.Dostoevsky, A.Pushkin, etc.) and long sequences of hydrogen bonds in double helixes of DNA of different organisms. Formalisms of quantum informatics are used in modeling some of these results taking into account thoughts of many researches about possible using principles of quantum informatics in organisation of living bodies.

@misc{petoukhov2019structural,
    author = "Petoukhov, Sergey",
    title = "Structural Connections between Long Genetic and Literary Texts",
    year = "2019",
    abstract = "Impressing discoveries in the field of the genetic code have been described by its researchers by means of the terminology borrowed from linguistics and the theory of communications. Leading experts on structural linguistics believe for a long time already that languages of human dialogue were formed not from an empty place, but they are continuation of genetic language or, anyhow, are closely connected with it, confirming the idea of information commonality of organisms. The aticle continues the theme about a connection of linquistic languages with the genetic language. It describes results of comparative study of long Russian literary texts (novels by L.Tolstoy, F.Dostoevsky, A.Pushkin, etc.) and long sequences of hydrogen bonds in double helixes of DNA of different organisms. Formalisms of quantum informatics are used in modeling some of these results taking into account thoughts of many researches about possible using principles of quantum informatics in organisation of living bodies.",
    url = "https://doi.org/10.20944/preprints201812.0142.v2",
    doi = "10.20944/preprints201812.0142.v2",
    openalex = "W2903619650",
    references = "doi1010160303264793900188, doi101017s0960129507006317, doi101038nature23474, doi101098rspa20180674, doi10111911463744, doi105860choice194685, openalexw1581103620, openalexw1596092532, openalexw1604177373, openalexw1965012847"
}

The article is devoted to the coverage of issues related to the manufacture of handrail joints (fittings) from wood. Attention is focused on the fact that the process of mechanical processing (cutting) of both handrails and fittings is complex, takes place in different vertical planes and is accompanied by errors depending on the type of cutting. Conducted research while cutting the fitting and handrails by hand with a hacksaw and with the help of a miter saw showed that errors during the connection (gluing) of the fitting with the handrails exist and they differ depending on the cutting method. The purpose of the work is to develop a method and a device for making precise cuts in different vertical planes during the formation of inter-floor handrail joints. Methods of fitting calculations with a trapezoidal and rectangular central element are given, as well as research methods. In particular, mathematical dependencies for calculating elements of fittings of various styles are given. The angular and linear parameters of the fitting elements are shown depending on the distance between the handrails. The proposed method of cutting in the vertical planes of the fitting and handrails and the device for implementing the method. It is shown that after cutting the fitting and handrails using the device, there are practically no gaps in the connection (less than 0.1 mm). The conducted studies showed that there are no standard machines, devices or mechanisms for cutting installed and fixed handrails in a given direction. Therefore, the proposed method of cutting in the vertical planes of the fitting and handrails and the device for implementing the method significantly improved the quality of the connection between the fitting and handrails. The use of the proposed technical solutions will significantly improve the quality of the connection, the design of the product and the convenience of human movement.

@article{sirko2023formation,
    author = "Sirko, Z. and D'yakonov, V. and Okhrimenko, S. and Torchilevskyi, D. and Starysh, E. and Hrytsun, V.",
    title = "FORMATION BETWEEN BARREL CONNECTIONS",
    year = "2023",
    journal = "Naukovì Dopovìdì Nacìonalʹnogo Unìversitetu Bìoresursiv ì Prirodokoristuvannâ Ukraïni",
    abstract = "The article is devoted to the coverage of issues related to the manufacture of handrail joints (fittings) from wood. Attention is focused on the fact that the process of mechanical processing (cutting) of both handrails and fittings is complex, takes place in different vertical planes and is accompanied by errors depending on the type of cutting. Conducted research while cutting the fitting and handrails by hand with a hacksaw and with the help of a miter saw showed that errors during the connection (gluing) of the fitting with the handrails exist and they differ depending on the cutting method. The purpose of the work is to develop a method and a device for making precise cuts in different vertical planes during the formation of inter-floor handrail joints. Methods of fitting calculations with a trapezoidal and rectangular central element are given, as well as research methods. In particular, mathematical dependencies for calculating elements of fittings of various styles are given. The angular and linear parameters of the fitting elements are shown depending on the distance between the handrails. The proposed method of cutting in the vertical planes of the fitting and handrails and the device for implementing the method. It is shown that after cutting the fitting and handrails using the device, there are practically no gaps in the connection (less than 0.1 mm). The conducted studies showed that there are no standard machines, devices or mechanisms for cutting installed and fixed handrails in a given direction. Therefore, the proposed method of cutting in the vertical planes of the fitting and handrails and the device for implementing the method significantly improved the quality of the connection between the fitting and handrails. The use of the proposed technical solutions will significantly improve the quality of the connection, the design of the product and the convenience of human movement.",
    url = "https://doi.org/10.31548/dopovidi2(102).2023.017",
    doi = "10.31548/dopovidi2(102).2023.017",
    number = "2/102",
    openalex = "W4376566408",
    volume = "2023"
}

The Upper Cretaceous carbonate reservoir oils from the Abadan Plain and Dezful Embayment in southwest Iran underwent analysis utilizing GC, GC-MS, and stable carbon isotope methods to elucidate the regional genetic oil family distribution. The study encompassed oil-source rock correlation through biomarker and stable carbon isotope ratios of Sargelu, Garau, Kazhdumi, and Pabdeh rock extracts to assist in establishing the best relevant source rock. Steranes and hopanes thermal maturity parameters were employed to define early maturity to the peak of oil generation level in the potential source rock. Equivalent vitrinite reflectances, estimated using aromatic compounds, suggest these paraffinic-naphthenic to aromatic-intermediate oils expelled from source rocks thermally matured from 0.68 to 0.85% Ro. The findings categorized the studied oils into families A and B. Family A oils, primarily associated with the Abadan Plain reservoirs, demonstrated a prevalence of more reducing conditions with a carbonate input predominance in early mature source rock. Family B oils originated from marl/shale facies in the Dezful Embayment, where the deeper source rock matured up to the peak of oil generation. Both hopanes and regular sterane distribution patterns reveal a contribution of terrigenous organic matter for both families. However, the δ13Csat and δ13Caro ratios demonstrate marine organic matter input predominance. The analysis emphasized the potential significance of the Kazhdumi Formation as the primary source rock for Family B oils in the Dezful Embayment. The Garau Formation was identified as the main candidate source rock, with the Sargelu and Kazhdumi Formations playing secondary roles to some extent in the generation of Family A oils. Additionally, the study underscored the impact of source rock maturity, organofacies, and trap formation timing as crucial factors influencing the geochemical characteristics of these reservoir oils across the studied area.

@article{doi101007s13202025019366,
    author = "Saadati, Hossein and Kadkhodaie, Ali and Rashidi, Mehrab and Bahrami, Hossein and Sarafdokht, Hashem and Martyushev, Dmitriy A. and Jahangard, AmirAbbas",
    title = "Genetic classification and geochemical evaluation of Upper Cretaceous carbonate reservoir oils in Dezful Embayment and Abadan Plain, SW Iran",
    year = "2025",
    journal = "Journal of Petroleum Exploration and Production Technology",
    abstract = "The Upper Cretaceous carbonate reservoir oils from the Abadan Plain and Dezful Embayment in southwest Iran underwent analysis utilizing GC, GC-MS, and stable carbon isotope methods to elucidate the regional genetic oil family distribution. The study encompassed oil-source rock correlation through biomarker and stable carbon isotope ratios of Sargelu, Garau, Kazhdumi, and Pabdeh rock extracts to assist in establishing the best relevant source rock. Steranes and hopanes thermal maturity parameters were employed to define early maturity to the peak of oil generation level in the potential source rock. Equivalent vitrinite reflectances, estimated using aromatic compounds, suggest these paraffinic-naphthenic to aromatic-intermediate oils expelled from source rocks thermally matured from 0.68 to 0.85\% Ro. The findings categorized the studied oils into families A and B. Family A oils, primarily associated with the Abadan Plain reservoirs, demonstrated a prevalence of more reducing conditions with a carbonate input predominance in early mature source rock. Family B oils originated from marl/shale facies in the Dezful Embayment, where the deeper source rock matured up to the peak of oil generation. Both hopanes and regular sterane distribution patterns reveal a contribution of terrigenous organic matter for both families. However, the δ13Csat and δ13Caro ratios demonstrate marine organic matter input predominance. The analysis emphasized the potential significance of the Kazhdumi Formation as the primary source rock for Family B oils in the Dezful Embayment. The Garau Formation was identified as the main candidate source rock, with the Sargelu and Kazhdumi Formations playing secondary roles to some extent in the generation of Family A oils. Additionally, the study underscored the impact of source rock maturity, organofacies, and trap formation timing as crucial factors influencing the geochemical characteristics of these reservoir oils across the studied area.",
    url = "https://doi.org/10.1007/s13202-025-01936-6",
    doi = "10.1007/s13202-025-01936-6",
    openalex = "W4407138320",
    references = "doi1010079783642878138, doi1010160016703779902576, doi1010160016703795000739, doi1010160079194679901071, doi1010160146638086900082, doi1010160146638086900896, doi1010160264817288900037, doi101016jmarpetgeo200307006, doi101126science2174559491, doi101126science2655173768"
}